NZX-S 1500 (Reference-Nr. 071453)

•  
  Número de referencia 071453

  Fabricación 2017

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Tornos

• Tipo de máquina

  Máquinas automáticas multihusillo de barras

• Fabricante

  DMG MORI

• Control

  Fanuc

• Descripción

  
  

  General
  2-Turret Shaft Lathe; Control: Control F32iB
  Characteristics
  Max machining diameter	120 mm
  Dimensions (L x W x H)	1,65 x 1,67 x 1,5 m
  Drive power main spindle	5,5/3,7/3,7 kW
  Rapid feed X / Z	20 / 30 m/min
  Movements X / Z	60 / 580 mm
  Lower Turret	6 Positions
  Rapid feed X / Z	20 / 30 m/min
  Movements X / Z	60 / 580 mm
  Upper Turret	6 Positions
  Speed max.	-3500 rpm
  Max. Turning Length	535 mm
  Weight approx.	3000 Kg

• Especificación

  
  

  Tailstock spindle travel check (4 positions)	Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.
  Foot switch for tailstock	Foot switch for tailstock The tailstock spindle is moved in and out with a foot switch.
  Coolant gun	Coolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressing its trigger starts the coolant discharge. The coolant pump automatically stops
  Air blow for tool tip	Air Blow for Tool Tip Air is blown to the tool tip for removing chips adhering to it. The air blow to the tool tip is effective in removing debris during in-machine measurement or removing chips during dry machining. For this specification, the air blow
  Interface for Air gun	Interface for Air Gun This is an I/F for mounting the air gun. The piping up to the coupler is provided. Parts from the coupler onward (air gun, coiling tube) are not included. Please prepare them separately. It is used for cleaning at replacement of
  Dry anchor	Dry anchor Anchors fitted on the bed to prevent the machine from moving because of vibrations when starting up or because of slight earthquakes. They control vibration in all directions as far as possible.
  Raised machine height 100 mm	Raised machine height 100 mm The machine is raised 100 mm using the special leveling blocks (the chip conveyor is raised the same amount as well).
  (X)Chuck, tailstock barrier	Chuck, tailstock barrier
  Program restart	The program restart function allows the program to be restarted from a desired block if a tool is broken or for restarting the suspended operation after holidays. To restart the program, specify the sequence number of the block or the block number to be r
  5 external M-codes	5 external M-codes This function contributes and expands the existing M-codes. To add this, let the M-codes output pass through the relay and dispose terminal block connected to the A-contact on the MTX substrate.(Terminal 1 and 2) We will prepare 5 in

• Estado

  Usado