DMU 60 eVo (linear) (Reference-Nr. 040815)

•  
  Número de referencia 040815

  Fabricación 2023

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Centros de mecanizado

• Tipo de máquina

  Centros de mecanizado (universales)

• Fabricante

  DMG MORI

• Control

  Siemens

• Descripción

  
  

  General
  Universal machining centre; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Feed rate longitudinal/transverse/vertical	80000/80000/80000 mm/min
  Rapid traverse longitudinal/transverse/vertical	80/80/80 m/min
  Working area 1
  Longitudinal	600 mm
  Cross	500 mm
  Vertical	500 mm
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	60
  Max. tool weight	6 Kg
  Max. tool length	300 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	130 mm

• Especificación

  
  

  Dynamic package DMU 60 eVo linear	Dynamic package for DMU 60 eVo linear linear drive X/Y-axis with 80 m/min // 262.48 ft/min rapid feed X/Y/Z 80 m/min // 262.48 ft/min, Acceleration X/Y/Z 10 m/s² // 32.8 ft/s² Active chiller for main spindle, lineardrives and table
  Spindle speed 20.000 rpm, HSK-A63	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Chain-type tool magazine 60 pockets	Tool magazine with 60 positions, chain type with double gripper (differently from standard)
  Pneumatic set up station for tool loading	Pneumatic set up station for tool loading
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  NC swivel rotary table	NC swivel rotary table - direct measuring systems, - incl. cooling of the table
  	Table surface 600 x 500 mm
  	Centre bore 30 H6 mm
  	Slot width 14 mm
  	Maximum load (table centre) 400 Kg
  Version Rotary joint, 4 channels, outside of table	Rotary joint connections on the face side for pneumatics or hydraulics in rotary table with swivel axis, 4 channels version Media connection on the face side of the table (not for option FD technology or torque table)
  	Rotation Speed 5. Axis 60 rpm
  	5. Axes (swivelling range) -5/+110 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 60 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 7
  3D Quick SET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
  Renishaw Blue Power Probe Kit PRO	Renishaw Blue Power Probe Kit PRO Infrared measuring probe PP 400 optical Laser tool measuring Renishaw NC4 blue automatically turn away of the measuring unit under table level Tool lenght and diameter measuring automatically cleaning through external air
  Signal lamp 4-colour	Signal lamp, 4 colours
  Internal Coolant Supply 80bar/980l frequency control	Internal coolant supply for spindle ICS with paper type filter Papertype-Filter 20 - 80 Bar // 290 -1160 psi frequency controlled 980-l tank // 37 / 25 l/min/ 258.9 gallon tank 9.7 / 6.6 gallon/min air purge for linear measuring system bed flushing double
  Extended swarf flushing	Extended swarf flushing Additional flushing of the working area door left hand side, y axis and right cabin wall volume of the flushing adjustable manual (only in combination with internal coolant)
  Double cartridge filter,25 µm	Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant)
  Coolant tempering for internal coolant 980l	Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l)
  Oil and emulsion mist separator	Oil and emulsion mist separator mechanical filter system 1100 m³/h
  EROWA Automation Interface PH 150 / PH CELL	Automation interface PH 150 / PH CELL for EROWA zero point clamping system consisting of: Interface (Profibus) via M65 Working table with 4-channel rotary joint Automatic loading door Control of EROWA (MTS / UPC) Zero-point clamping system Automation Soft
  Safety glass at operators door	Laminated safety glass at the operators door, side glass polycarbonate preferably for combination with automation cabin
  Package tropical climate(dynamic vers.)	Package for tropical climate for dynamic version for ambient temperature max.50°Celsius: includes blocking air for linear measuring system, temperature control of hydraulic oil
  Exhibition design eVo	Exhibition design DMU eVo chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; door media supply; paper version of electrical plan
  Sensor package i4.0	Sensor package i4.0: SGS Spindle Growth Sensor ICS flow sensor
  Maintenance Package I4.0	Maintenance Package I4.0: measurement of tool pull-in force autom. lubrication of tool clamp monitoring of pneumatics
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
  DXF Reader	DXF-Raeder: Open CAD files Extracting of counters and drilling positions directly in G-code and ShopMill programs Supported elements: drilling positions and contours
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  3D data model	3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement)
  Special equipment	Interpolation turning 2.0 Technology cycle for the machining of inner and outer diameters with orienting spindle with the option of free contour programming
  Special equipment	- Standard set-up elements - Integrated EROWA MTS 2.0 chuck - Extended set-up and retraction - Machine preparation for system Renishaw EDGE-NC4+

• Estado

  Usado