CTX beta 800 TC (Reference-Nr. 071548)

•  
  Número de referencia 071548

  Fabricación 2022

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Centros de mecanizado

• Tipo de máquina

  Centros de mecanizado (universales)

• Fabricante

  DMG MORI

• Control

  Siemens

• Descripción

  
  

  General
  - Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate
  Working area
  Swing diameter over guide ways	500 mm
  Turning diameter	500 mm
  Max. Turning Length	800 mm
  Bar diameter max.	65 mm
  Work spindle (left)
  Spindle nose	Flat flange
  Diametre of spindle nose	170h5 mm
  Spindle bore	87 mm
  Spindle diametre on front bearing	130 mm
  Main drive 1
  Drive power (100% DC)	25 kW
  Drive power (40% DC)	32 kW
  Speed range	- 5000 rpm
  Torque (100% DC)	280 Nm
  Max. torque (40% DC)	360 Nm
  C-Axis Speed	-5000 rpm
  Torque of C-Axis (holding torque)	280 Nm
  Turning-milling spindle
  Spindle taper	HSK-A 63 DIN 69893
  Spindle speed	-12000 rpm
  Drive power (100% DC)	19 kW
  Drive power (40% DC)	22 kW
  Torque (100% DC)	85 Nm
  Torque (40% DC)	100 Nm
  locking moment	1000 Nm
  Floor space/Weight
  Dimensions (L x W x H)	4,78 x 2,2 x 2,02 m
  Weight approx.	10000 Kg

• Especificación

  
  

  Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
  5-axis simultaneus machining	5-axis simultaneous machining
  Counter spindle centre	Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery
  Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
  Y-Axis Parting	Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and
  3D quickSET (with toolkit)	3D QuickSET for turn-mill machines - Toolkit (consisting of magnetic foot holder with measuring ball and dial gauge) - For review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - Requires 5-
  ATC	Application Tuning Cycle ATC - Demand-oriented adjustment of axis dynamics for machining tasks: accuracy (contour accuracy) / surface (smoothing) / speed (high dynamics) - Beneficial for turning-milling operations (2+1 / 3+2 / 5-axis simultaneous)
  5X Precision & Dynamics package	5X Precision & Dynamics package, consisting of: - 5-axis simultaneous machining - 3D-QuickSET - ATC
  DXF-Reader for Siemens	DXF-Reader for Siemens direct on the control for the import of DXF-files as contour or position sample. - support of layer and colours - selection of geometry elements
  Chuck rinsing device, mainspindle	Chuck rinsing device for main spindle, outside
  Chuck rinsing device, subspindle	Chuck rinsing device for subspindle, outside
  Clamping pressure adjustment, motor-adj. valves MS	Clamping pressure adjustment with motor-adjustable valves The clamping pressure can be specified by NC program
  Dyn. two-pressure clamping, motor-adj. valves CS	Dynamic two-pressure clamping for the counter spindle with motor-adjustable valves The clamping pressure can be specified by the NC program
  Tailstock function for counter spindle	Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC
  Counter spindle ISM 52	Counter spindle as integrated spindle motor ISM 52 (instead of tailstock) - Sync motor - Drive power (100%/40% d.c.) 12.5/14.5 KW (16.76/19.44 hp) - Torque (100%/40% d.c.) 170/200 Nm 125.37/147.5 lb*ft - Speed range 0-6000 rpm - Partial hollow clampin
  Hinged type chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
  BFU 8/20 bar, 600 l	Compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (CTX gamma TC 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
  Automatic actuation of sliding cover, electrical	Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible)
  Workpiece touch probe TC62, BLUM	Workpiece touch probe TC 62, BLUM - Dimensions basic body (excl. stylus length): L= 62 mm (2.4 in), Ø= 40 mm (1.5 in) - Interchangeable in turning/milling spindle - Sending and receiving unit with probe tip - Incl. cycle package Quickstart
  Sensor package Industry 4.0	Sensor package Industry 4.0 for holistic condition monitoring with visualization in Condition Analyser App and analysis of the machine and the machining processes (Attention: The DMG Mori Condition Analyser App is not part of this option)
  Electrical interface for Robo2Go	Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as
  2 multi tools for turning	Set (2 pieces) of multitools for turning Clamping area 25 mm, 3-fold holder
  3-jaw chuck, BHD 250-66, make SMW	3-jaw power clamping chuck with through-hole, type BHD 250/66, make SMW, incl. connecting elements
  3-jaw chuck, BHD 210-52, make SMW	3-jaw power clamping chuck with through-hole, type BHD 210/52, make SMW, incl. connecting elements
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  Ligh switch cabinet	Ligh switch cabinet (fluoresent lamp starterless) with integrated socket, 230 V, 2 A load, make Rittal on lott via Transformer chead main switch
  Hydraulic filter with monitoring and prewarning	Hydraulic filter with monitoring and prewarning consisting of: - DIN filter with bypass - Pressure switch for filter monitoring with prewarning Note: On machines with a milling spindle, both the hydraulic filter for the oil-air lubrication and the f
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Package for increased ambient temperature	Package for increased ambient temperature consisting of cooling system for control cabinet (until 40º)
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  YOUR CELOS Backup Stick	Your CELOS Backup Stick Backup your CELOS machine tool with Siemens or Heidenhain Control
  Module 25 kg	Module 25 kg - Max. load of the robot 25 kg (55.1 lbs) - Gripper base with outlet lance Note: Indicated is the maximum load of the robot in the tool center point. The maximum workpiece weight is depending on the grippers and the workpiece length.
  Robo2Go	Flexible workpiece loading and unloading system with a six-axis-industrial-robot - Replaceable workpiece storage incl. workpiece trays: - Max. 88 pieces up to dia. 60 mm (2.36 in) - Max. 29 pieces up to dia. 125 mm (4.92 in) - Max. load of the tray
  3-jaw gripper	3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) -
  3-jaw gripper	3-jaw gripper for: - Chuck parts - Inside and outside handle - Min. workpiece length 20 mm (0.78 in) 10kg-module: - Workpiece diameter 20-100 mm (outside) (0.78-3.9 in) 20kg & 35kg-module: - Workpiece diameter 25-175 mm (outside) (0.98-6.88 in) -
  2x Additional 2-jaw gripper	2x Additional 2-jaw gripper for: - Chuck and shaft parts - Inside and outside handle 10kg module: - Diameter 20-80 mm (shaft) (0.78-3.14 in) 20kg and 35kg module: - Diameter 20-170 mm (shaft) (0.78-6.69 in)
  Pressure piece	Elastic pressure piece for compensation angle errors at sawing sections
  Workpiece tray for shaft parts	Workpiece tray for shaft parts - Max. load of the tray: 500 kg (1102 lbs) - Workpiece dia.: 20 - 170 mm (0.78-6.69 in), workpiece length: 120 - 950 mm (4.72-37.4 in) - Incl. 5 workpiece support kits (variably pluggable) with 50 mm (1.96 in) division:
  Robot in white exterior paint	Robot in special paint calcite white (RAL 9010)
  Attention: Preparation for automation is necessary	Attention: Preparation for automation is necessary For the connection of the Robo2Go the machine needs to be prepared with the electrical interface.
  Overall declaration of conformity Siemens	Overall declaration of conformity according to Machine directive 2006/42/EC, for the system Robo2Go + machine with Siemens The supplementary technical documentation of the declaration of overall conformity consist of: - An overview drawing of the ma

• Estado

  Usado