CLX 450 TC (Reference-Nr. 071682)

•  
  Número de referencia 071682

  Fabricación 2021

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Centros de mecanizado

• Tipo de máquina

  Centros de mecanizado (universales)

• Fabricante

  DMG MORI

• Control

  Siemens

• Descripción

  
  

  General
  Universal turning-/milling center; Control: SLIMline® Control SIEMENS 840D sl, w/o CELOS
  Working area
  Swing diameter over guide ways	500 mm
  Turning diameter	400 mm
  Max. Turning Length	1100 mm
  Bar diameter max.	65 mm
  Work spindle (left)
  Spindle bore	87 mm
  Spindle diametre on front bearing	130 mm
  Main drive 1
  Drive power (100% DC)	14 kW
  Drive power (40% DC)	17 kW
  Speed range	- 5000 rpm
  Bench speed	485 rpm
  Torque (100% DC)	275 Nm
  Max. torque (40% DC)	345 Nm
  Turning-milling spindle
  Spindle taper	HSK-A 63 DIN 69893
  Spindle speed	-12000 rpm
  Drive power (100% DC)	8,8 kW
  Drive power (40% DC)	10,5 kW
  Torque (100% DC)	73 Nm
  Torque (40% DC)	90 Nm
  locking moment	850 Nm
  Swivelling range	+/- 120 degree
  Tool magazine
  Type of magazine	Chain
  Number of tools	30
  Max. tool diameter	78 mm
  Max. tool-Ø with free adjacent pockets	125 mm
  Floor space/Weight
  Dimensions (L x W x H)	5,19 x 2,11 x 2,47 m
  Weight approx.	11200 Kg

• Especificación

  
  

  Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
  crownHobbing	crownHobbing Technology cycle with dialog-guided programming for the production of hirth gearing by the method of impact tooth milling. This option contains the technology cycle with the corresponding input mask.
  Interpolation turning	Turning-recessing cycle Manufacture of simple sealing Surfaces and grooves using turn/mill centers
  Counter spindle centre	Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery
  Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
  Polygon Turning	Polygon Turning for machining of elliptic and polygonal shapes on end faces Note: Only in combination with option B-A0326 Excentric turning and milling operation
  Program state control	With the program state control of the part state is retained on the control and / or influenced. Particularly suitable for multi-channel machines.
  Run-time monitor	Graphic display of the program runtime (main and idle times) of up to 3 channels on the control system
  Broaching	Technology cycle with dialog-guided programming for the production of any keyways according to DIN6885 or driving grooves according to DIN138 with standard tools. This option contains the technology cycle with the corresponding input mask.
  Y-Axis Parting	Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and
  ATC	Application Tuning Cycle ATC - Demand-oriented adjustment of axis dynamics for machining tasks: accuracy (contour accuracy) / surface (smoothing) / speed (high dynamics) - Beneficial for turning-milling operations (2+1 / 3+2 / 5-axis simultaneous)
  autoCHUCK	Technology cycle for automatic determination and setting of the drive parameters of the main and counter spindle for optimization of the control and positioning behavior in dependency on component and chuck weight, The drive parameters can be set in the
  Gear Broaching	Technology cycle for pushing internal and external gear teeth on components with single-tooth or multi-tooth shaping tools. The workpiece, the tool and the process parameters can be specified via an operating mask by the user. Important settings of
  FreeTurn	Technology cycle for easy use of FreeTurn tools from CERATIZIT. It enables the setting of any angle of the available cutting edges and contributes to the simple integration of the tools in the NC program. Pressing or pulling cuts are freely adjustable.
  Multi-thread cycle 2.0	Multi-thread cycle 2.0 Cycle to create position orientated threads with free contours, pitches and free number of threads, e.g. for big transmission or special threads. Targeted overlapping of threads with cross-holes, e.g. redirection systems with bal
  Chuck rinsing device, mainspindle	Chuck rinsing device for main spindle, outside
  Chuck rinsing device, subspindle	Chuck rinsing device for subspindle, outside
  Dynamic two-pressure clamping at the control, MS	Dynamic two-pressure clamping at the control for the main spindle The clamping pressure can be specified by NC program
  Dyn. two-pressure clamping, motor-adj. valves CS	Dynamic two-pressure clamping for the counter spindle with motor-adjustable valves The clamping pressure can be specified by the NC program
  Hollow spindle stop dia. 67 mm	Hollow spindle stop, adjustable, mounted at the rear of the clamping device dia. 67 mm (2.63 inch) (independent to the chuck)
  Tailstock function for counter spindle	Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC
  Counter spindle ISM 65, A2-8	Counter spindle as integrated spindle motor, ISM 65, A2-8 - Drive power 14/17 kW (18.7/22.7 hp) (S1-100%d.c. / S3-40%d.c.), - Torque 275/345 Nm (202.8/354.4 lb*ft) (S1-100%d.c. / S3-40%d.c.), - Speed range 0-5.000 rpm - Partial hollow clampin
  Hinged type chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
  BFU 8/20 bar, 980 l, cooler	Compact coolant system, consisting of: - coolant tank, 980 litre 8 bar/20 litre/min (CTX beta 2000 TC, CTX gamma TC 2nd: 8 bar/80 l/min) and 20 bar/25 litre/min (theoretical pump performance) programmable via M-functions coolant supply through
  Workpiece touch probe RMP40, Renishaw	Workpiece touch probe RMP40, Renishaw - Interchangeable in turning/milling spindle - Probe reception and tracer point with data transfer between probe and receiver by radio signals - Incl. measuring cycle package Inspection Plus Notes: - Custom meas
  Tool pre-setting probe,make RENISHAW	Tool pre-setting probe, make Renishaw positioned over the spindle axes, composed by: - Laser measuring device NC4 with measuring and calibration software for measuring in diametre- length and wear of the multi-insert boring and milling tools; - Measuring
  Automatic actuation of sliding cover, electrical	Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible)
  Electrical interface for Robo2Go	Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as
  Protection Package	Protection Package consisting of: - MPC 1.0 - Macine Protection Control - Easy Tool Monitor 2.0
  Package for tropical climate (ambient temp.50ºC)	Package for tropical climate for ambient temperature of max. 50ºC, consisting of cooling system for control cabinet (until 50º) and machine
  Package for instable supply	Package for instable supply consisting of under voltage circuit-breaker and Z-axis / Z-axes feed motor (s) with brake (s)
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  Window rinsing of the security window	Window cleaning of the security window of the working area door by compressed air (Remark: The employment of coolant can limited the view on the workpiece at machining)
  PDA light	Signal provision for production data acquisition. There are 6 signals as potential-free contacts provided.
  NETservice	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoTconnector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)

• Estado

  Usado