DMC 650 V (Reference-Nr. 051373)

•  
  Número de referencia 051373

  Fabricación 2025

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Centros de mecanizado

• Tipo de máquina

  Centros de mecanizado (verticales)

• Fabricante

  DMG MORI

• Control

  Heidenhain

• Descripción

  
  

  Technical Data
  Feed rate longitudinal/transverse/vertical	1-42000/1-42000/1-42000 mm/min
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  General
  Vertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640
  Working area 1
  Longitudinal	650 mm
  Cross	520 mm
  Vertical	475 mm
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	30

• Especificación

  
  

  Table	Table surface 960 x 570 mm
  	Maximum load (table centre) 800 Kg
  	Slot width 14 mm
  	Number of Slots 5
  	Distance between T-Slots 100 mm
  Spindle speed 15,000 rpm, 200 Nm	Motor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible
  Tool magazine 30 pockets SK40	Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazine
  Preperation for NC-Devider EA520 direct	Preparation for NC-Divider EA520 with direct measuring system
  Infrared measuring probe TS460	Infrared touch probe make Heidenhain TS 460
  Internal coolant supply basic package 2	Internal coolant supply basic package 2 contents: Rotary inlet for spindle, Internal coolant supply Papertype-Filter 20 Bar / 290 psi Tank capacity: 600l / 158,5 US gallons Chip conveyor, Chip flushing working area Cabin roof double cartridge filter 50µm
  Oil- and emulsion mist separator mechanical	Oil- and emulsion mist separator mechanical (only available with option cabin roof)
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air with low oil rate
  Coolant-air blast change-over	Coolant - Air-blast changeover external switchable via M-Function
  Package for tropical climate	Package for tropical climate for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Service Agent	Service Agent Overview of all maintenance work on the machine

• Estado

  Usado