DMF 360|11 (Reference-Nr. 030340)

•  
  Número de referencia 030340

  Fabricación 2025

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Fresadoras

• Tipo de máquina

  Fresadoras de bancada con soporte regulable

• Fabricante

  DMG MORI

• Control

  Heidenhain

• Descripción

  
  

  General
  Traveling column machine DMG MORI Design; Control: CELOS with Heidenhain TNC 640
  Technical Data
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	40/40/40 m/min
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	60
  Max. tool weight	6 Kg
  Max. tool length	300 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	130 mm
  Working area 1
  Longitudinal	3600 mm
  Cross	1100 mm
  Vertical	900 mm

• Especificación

  
  

  Spindle speed 15,000 rpm, HSK-A63, 200Nm	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)
  Rigid table with integrated rotary axis (leftside)	Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position
  	Table surface 4200 x 1100 (Ø 1050) mm
  	Slot width 18 mm
  	Number of Slots 11
  Direct measuring system	Direct path measuring system
  	Rotation speed max.4. Axis 50 rpm
  	Distance between T-Slots 100 mm
  Cabine	Full protection cabin
  Tool magazine 60 places	Tool magazine 60 places SK40/HSK-A63 Chain type with double gripper
  3D quickSET elevated constructuion	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
  Tool laser measuring Blum	Laser tool measuring Blum (not with TT 140 possible, for pendulum machining please order 2 pieces)
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Door drive for working area doors	Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
  Signal lamp 4-colour	Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
  Internal Coolant Supply 80bar/980l frequency controled	Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
  Coolant tempering for internal coolant 980l	Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l)
  Double cartridge filter,25 µm	Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant)
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air, low oil rate possible
  Oil mist separator	Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
  Free M-functions (M80-M88) for Heidenhain	Free M-codes (M80-M88) for Heidenhain NC-control potential-free on contacts inside electrical cabinet
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Safety package for power failure (incl. IPC)	Safety package for power failure: Package for power failure IPC CELOS (for proper shutdown of IPC); Overvoltage limiter, Undervoltage monitoring with fast deceleration control
  Package for tropical climate DMF360 (Y1100)	Package for tropical climate standard machine for ambient temperature max.50° Celsius: including active cooling motor spindle air purge for linear measuring system temperature control for hydraulic oil
  3D data model	3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement)
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	Desktop Programming Software Heidenhain TNC640

• Estado

  Usado